|
Standard frames for brick walls |
|
Eud Corner frame
|
|
One part standard frame according to DIN 18111.
- galvanized thin sheet steel DIN EN 10147/DIN EN 10143 (1,5mm)
- hydro stove-enamelled for easy workability (light grey) with optimal compound adhesion for finishing coat
- metre mark and bedding mark
- screwed spacer rails for convenient rebate measurement and easy disassembly
- shock absorbing rubber seal no. 6150 (light grey)
- 2 hinge pockets BTV 10200 (V8610) for each side, mortar impervious, therefore left/right useable
- 8 corner frame nail anchors (welded)
- backbend front 10mm/back 17mm
Tender Specification - Technical Drawing - Installation Instructions
- Order Form
|

|
|
|
|
|
|
|
Uud Enclosure frame
|
|
One part standard frame according to DIN 18111.
- galvanized thin sheet steel DIN EN 10147 / DIN EN 10143 (1,5mm)
- hydro stove-enamelled for easy workability (light grey) with optimal compound adhesion for finishing coat
- metre mark and bedding mark
- screwed spacer rails for convenient rebate measurement and easy disassembly
- shock absorbing rubber seal no. 6150 (light grey)
- 2 pin hinges BTV 10200 (V8610) for each side, mortar impervious, therefore left/right useable
- architrave front/back 30mm
Tender Specification - Technical Drawing - Installation Instructions
- Order Form
|
|